Where can I buy welding consumables in Zambia?

ETEQ Industrial Zambia holds Lincoln Electric and Taurus consumables at its Kitwe warehouse for the Copperbelt, and supplies North-Western Province through the Solwezi supply point.

Do you stock ER70S-6 MIG wire?

ER70S-6 is one of the fast-moving lines held in Kitwe. Send the diameter and spool size with the quantity and we will confirm availability against stock.

Can you supply welding PPE on the same order?

Yes. Taurus PPE runs alongside the Taurus consumables range, so helmets, gloves and jackets travel on the same order and lead time as the wire and rods.

Can you quote against a shutdown scope?

Yes, and it is how most of this range sells. Quantities are set against the scope rather than an average month, and confirmed in writing before the shutdown starts.

Welding Consumables in Zambia

MIG wire, flux-cored wire, TIG rods, stick electrodes and torch consumables held on Zambian stock in Kitwe, and supplied through Solwezi for the North-Western mines.

Lincoln Electric wire feeder and a spool of flux-cored welding wire, the consumables held for Kitwe and the CopperbeltPhotograph by Mgschuler via Wikimedia Commons, CC BY 3.0.

Welding consumables are the line item that decides whether a Zambian shutdown finishes on schedule. They are consumed faster than anyone forecasts, they are the wrong thing to substitute when a procedure names a grade, and a shortfall in the Copperbelt cannot be corrected the same afternoon from Johannesburg. That is why this stock sits in Kitwe rather than being promised from across a border.

Two brands cover the range for different reasons. Lincoln Electric is stocked for work where the welding procedure specifies the consumable and substitution is not permitted — code work, structural repair, anything a client or an inspector will sign off. Taurus covers general fabrication, mine maintenance and repair at a keener price, and carries the welding PPE alongside it so a mixed requisition stays on one order and one lead time.

The technical questions come up constantly, so the guides section answers them properly: ER70S-6 against ER70S-3 for scaled plate, flux-cored against solid wire for site and out-of-position work, and 6013 against 7018 where strength, toughness and hydrogen control matter. If a procedure sheet is available, send it — specifying against the procedure is faster than specifying against a description.

Orders are quoted line by line off a list: grade, diameter, pack size and quantity. Fast-moving sizes go out against Kitwe stock; anything else is quoted with a confirmed lead time. Repeat lines stay on file, which is what turns the next shutdown order into a reference number instead of a fresh enquiry.

MIG and flux-cored

Solid MIG wire in mild steel, stainless and hardfacing grades subject to stock
Flux-cored wire for out-of-position, site and windy conditions
Contact tips, nozzles, liners and drive rollers
Spool and pack sizes matched to the way the shop consumes them

TIG and stick

TIG filler rods by material, diameter and length
Tungstens, collets, collet bodies and cups
6013 for general fabrication and thin material
7018 low-hydrogen for structural and code work, plus rod ovens

Send this with the enquiry

Wire or rod type and grade — or the welding procedure sheet
Diameter, plus spool or pack size
Quantity and reorder frequency
Delivery town — Kitwe, Chingola, Solwezi, Ndola or a mine site

Ranges

Where this is supplied

Questions buyers ask

Send the list. Get a price and a date.

Consumables come back with pricing, availability and lead time. Equipment comes back with the model, the carriage class and a price.

Request a quote Find a warehouse

Loading…